It’s a great shade and it very fenderish, nothing that would work on a Gibson and many others. Now we have purchased Tom DeLonge Strat professional drawings and meticulously studied this electric guitar, thus we will grasp every details of processing technique. So all our guitars are flawless when it comes to craftmanship. Apart from, they’re absolutly a hundred% hand-mades. An alder body, maple neck with a rosewood fretboard. These three kinds of wooden have been bought in large volumes from our skilled wood suppliers. So we are able to duplicate it in an value-efficient technique.
I purchased a sprig can of Nitrocellulose laquer Surf Inexperienced from Guitar Reranch. They make the precise reproduction colors discovered on the old Fender’s. I’ve achieved my justifiable share of spray painting in my time, from model vehicles to autobody touch up. Figuring out that spray paint can drift and cover other things with colour and dust, I empited half my storage and covered up the rest of the items I didn’t want dusted. This paint was a sand storm in a can. The dust was so heavy, it falls to the bottom. LOTS of dust. I’ve never seen a lot paint dust from a sprig can. This coats were also dusty which frightened me. I might get a gloss on the body to avoid wasting my life.
Very effectively achieved, I am currently working on an analogous project but I’m going for a pleasant creamy white color. The Surf Inexperienced FSR Fender Particular Version 60s Strat features a gloss nitrocellulose end with matching headstock. I strongly choose surf/seafoam with a maple board. I actually love the colour. My first, favourite, and best parts caster is surf. For the nicks, dings, belt and rivet markings, and accidental drops, I used the identical screwdriver and my driveway for a couple whoops moments. These were time labored with only the steelwool methodology and coloration from the bare wood areas.
Observe me to see how much we already performed for you and a few factor you must know. When completed I had no wood grain, little or no evidence of prior highway worn injury, and it was smooth. Nice job, it takes stones to do what you probably did to that Strat and it turned out lovely. is an unbiased, member supported forum and is not affiliated with Fender Musical Instruments Corporation. Thanks in your consideration. Listed below are something you might need to find out about this guitar.
In hindsight, there are easier alternate options which can be inexpensive too. You can purchase Surf Green bodies on eBay all day long for beneath $a hundred and fifty. This could drastically minimize down in time however you’d never get the experience of studying methods to refin. I now feel confident I can sort out most solid shade refin jobs by myself if given the time and materials. I went to a guitar relic web site that had directions on the best way to relic a guitar. The rule to recollect: don’t over-do it.
I bought a spray can of Nitrocellulose laquer Surf Inexperienced from Guitar Reranch. They make the exact duplicate colors discovered on the outdated Fender’s. I’ve accomplished my fair share of spray portray in my time, from model cars to autobody touch up. Figuring out that spray paint can drift and cover other issues with coloration and dirt, I empited half my storage and covered up the remainder of the items I didn’t need dusted. This paint was a sand storm in a can. The dust was so heavy, it falls to the ground. TONS of dust. I’ve by no means seen so much paint mud from a spray can. This coats were additionally dusty which worried me. I could get a gloss on the physique to save lots of my life.
Do not strive what I did – using an electric sander. It ate by way of the first coat simply. I had to do this part over. After four coats – with moist sanding with 220 grit between coats, I finally completed it off with 320 grit. The sanding is time consuming but worth the effort. You will discover brush marks that I eventually obtained sanded out with extra coats and sanding. Let the sandpaper do the work and don’t dig into it. Also I didn’t spend a lot attention to detail within the areas where the pickguard will cover. In truth, after the first coat, I masked off this area so it did not construct up with sealer/primer drips.
Just to get an concept of how cool this is gonna look, I test fitted the pickguard and neck after sanding the 2nd coat. Seems like the intro guitar, huh? It is almost gonna be a disgrace to use the carrying to my exhausting work. The outcomes have been as expected. The triple thick had probably the most gloss and none of these acrylic products triggered any hurt to the paint. I made a decision to begin with the least gloss and work my means up if want be. The unique guitar did not have a thick layer of gloss. When carried out I’ve to rough it up anyways to offer it the swirled aged look of gloss that has seen it is years.